• Bi-Directional converter over Single Fiber Link (Simplex)
• Supports standard 1GbE Ethernet inputs
• Closed loop WDM fiber system
• 3x Ethernet switch (1x Optical, 2x RJ45)
• Auto 10/100/1000 Ethernet speed detection
• Manually force 10Mbit/s Ethernet speed if needed
• Auto and Manual Ethernet crossover selection
• Distances up to 10km (6.2 miles) over Single-mode fiber

Description

The OBD 1514 E is a matched pair of compact Ethernet switches designed to extend the reach of 1GbE signals over long distances. The two switches are linked via simplex bi-directional fiber which operates at a constant 1Gbit/s speed.

This pair of modules uses WDM (Wavelength-devision Multiplexing) fiber technology in a closed loop environment, It functions as a simple Ethernet extender solution. The fiber link supports distances up to 10km* and provides a single, high speed 1Gbit/s error-free optical connection between the two locations.

Each OBD 1514 E module has two standard RJ45 Ethernet ports. The complete system functions as a 4 ports Ethernet switch, providing two standard RJ45 Ethernet ports at each end bridged with fiber. For legacy systems, each Ethernet port can be set for automatic speed detection (10/100/1000) or forced to 10 Mbit/s. Each port uses auto crossover detection or can be forced manually if needed. These functions are available using the dip switch located on the device.

Note: This system uses WDM and should only be used in point to point applications. WDM cannot be integrated into a CWDM system.

*Distance is an approximation. Actual distances achieved can be longer or shorter depending on the type of cable. Determine link losses and perform optical budget calculations to ensure correct operation.