Corvid 44 12G BNC boasts four bidirectional 12G-SDI spigots with a Reference Input. 8K Input or Output is possible using quad 12G-SDI cables and 4K/UltraHD I/O can be achieved with either a single 12G-SDI or 6G-SDI cable, or quad 3G-SDI cables. 2K/HD I/O can be achieved with a single SDI cable or dual link SDI, while allowing capture and monitoring via SDI to take place simultaneously.
Corvid 44 12G BNC is available with either active (fan) vs. passive cooling (no fan), with both versions supporting RS-422 and LTC Input via headers on the top edge of the card.
Other Corvid 44 12G models are available, including low profile versions with HD-BNC connections.
Note: High Frame Rate and 8K/UltraHD2 capabilities are dependent on host system attributes. Not all systems and configurations will support all frame rates and raster sizes.
*Bit depth support is application dependent. Check with your software manufacturer for compatibility.
Note: Corvid 44 12G BNC SDI connectors are full-size BNC
*Bit depth support is application dependent. Check with your software manufacturer for compatibility.
Note: Corvid 44 12G BNC SDI connectors are full-size BNC
Note: When connections are configured for 12G-SDI or 6G-SDI, only UltraHD/4K/UltraHD2/8K formats are supported.
1 | GND |
2 | RX- |
3 | TX+ |
4 | GND |
5 | No Connection |
6 | GND |
7 | RX+ |
8 | TX- |
9 | GND |
Shell | GND |
Note: Unlike other Corvid cards, Corvid 44 12G can use either PCIe power from a 6 pin ATX connector, or via the PCIe slot